Making and Knowing
A minimal edition of BnF Ms Fr 640

[TOC] | [diplomatic]

- - - - - folio image: 114r - - - - -

Second Cast

When you have well molded the first part of the animal, that is the back, the backbone, and the entire top part, and the len half—mold where it is enclosed has set and is hard enough

Figure Figure uncover the whole bottom part & side of the belly, # first with a knife & tant at the thickest places, & then with a pen—knife, where the most delicate parts are enclosed, such as the legs, the tail, & similar things, and because the head is higher, you will also need to look for it & uncover deeper, and made a deeper notch there which ought to release easily. That is to say widening by the outside, so that the second mold that you will cast on it can come out well, which even the animal can help with, which is malleable and obedient, having naturalness. However ad, be more scrupulous when uncovering the throat of the lizard rather than the snake, for the lizard has big jaws & big bones that are not malleable, and has hollow ears, where the wet sand has entered, is not aff easy to release. But you will avoid all of this, if you uncover half of the head and those things that you know do not release easily. Once everything is uncovered well, blow on top & wipe each part, by wiping with little cloths of swine fur, slightly moistened by the end, with a little saliva, or with clear water, as you dissolve it, so that your the uncovered lower part of your animal will be very neat. # 🝋 With this done, dip le rev your mold your mold, for the length of a pater noster in water, not du le the uncovered side but opposite, & the reverse of the uncovered thing. And this is so that, by sucking the water inside, the oil with which you smear after the other side pour eviter, is not imbibed at all, but remains on the surface & prevents the second cast that you will cast on it from attacking it. Having therefore thusly dipped the reverse of your mold in the water, take a pinceau especially dedicated to this, & en oings with it smear some oil the whole surface of the mold, except the animal, which must in no way touch the oil, & take head to retrace & smear well with the point of a pinceau between the parts & through all the delicate parts. And if by chance the oil is imbibed, dip the mo reverse of the mold as mentioned in water, & you will see the oil return to the surface in little drops.

at left top margin

Mold small animals like big ones, except that you need to make delicates points of fil cist cittern strings, both long & short.

at left top margin

Figure Figure Remove with your small flat pincers, all the points.

at left top margin

# and then +tantost avecq

at left bottom margin

# However, leave the point of the throat, so that it serves as a clue to find the head, which is deeper down than any other part, because when making the arrangement you arranged it higher. It is also at the level of the head that you should make the biggest notch & start with this one to uncover, and follow the rest through the trace of the points.

at left bottom margin

# And if some bit of nail from a leg, or from a tail, or from another should separate from the mold, put y between but a small grain of wax, & with the point of a hot iron wire, join it then adapt your mold with a knife, & make there notches at the sides, so that the other half binds to it.🝋 Figure Figure

[continued]